In this article on LED Strips: what I should know before buying it, we will explain what you must take into account, that is, in what aspects you should notice.
There are many possibilities of illumination that the LED provides and let’s not talk about the amount of advantages that we get when using it, but in most cases we are not very clear how to get the most out of it.
Since not all LED luminaires are the same, depending on the use that we are going to give it is advisable to know its quality, something that will undoubtedly affect the price, but if for example our intention is to light a kitchen cabinet, we do not need to buy lighting industrial. No doubt it will have higher quality, but the difference in the price would be abysmal without forgetting that the amount of light that emits in no case would be the adequate one. You can remember this by visiting the series of articles on LED lighting and health.
At a glance, it is very difficult to differentiate the good or bad quality of an LED strip, so we must look at the components and their technical specifications.
If we buy a poor quality LED bulb or lamp , we will get poorer lighting, less intensity and very likely to burn soon.
The main factors that we must consider before buying LED Strip are:
In the quality of its plate: this dictates the duration and quality of the Strip.
It is actually a small copper plate along the plate where LED chips are inserted.
We must look at its thickness and width, the more copper it has, something that directly influences the resistance to breakage, dissipate heat and transmit energy.
In electronic resistors. Usually the LED strips of good quality, has the internal resistors calculated, in charge of limiting the current.
But if we acquire a poor quality, they mask this by making the current greater to bring even more brightness to LEDs, which makes the lighting is similar to those of the highest quality. This excess current causes a greater deterioration and a considerably shorter service life.
In the coating, something that causes the strip to harden in the heat and cracks more quickly, in addition to reducing its transparency. In a short time, they add light with an increasingly yellow tone.
It also affects the degree of protection IP as they allow both dust and water access to the interior.
Its coating must be flexible, transparent, durable and resistant to heat.
7 Things to Know Before Buying and Installing 12V LED …
Hero Maestro Edge
Best 25+ Workbench light ideas on Pinterest
Power Protection Buying Guide
LED LIGHT SABER LASER CROSS X SWORD SWORD 75 cm long LED …
Led Robot Costume Led Robot Suit Type-D1
Free cut Light guide panel wholesale
Five things you need to know before buying dimmable LED lights
4 things you need to know before buying a laptop …
Rgb Color Change Light Up Princess Dress,Programmable …
Things you need to know before buying a touch dimmer lamp …
What to Know Before Buying Your Wheels
Dell E2417H – LED monitor – Full HD (1080p)
Seven automotive trends from 2019 CES you need to know …
Lexus ‘screen on wheels’ has 41,999 programmable LEDs …
What to know before you buy the Apple Watch w/ Milanese …
17 Best ideas about Cool Stuff on Pinterest
low power – First project, powering an IC
Sr-2818 Sr-1009fawi Wifi Rgb Controller
Read This Before Shelling Out for Those Magnetic False …